New cabinets above my range in Ottawa: what clearance applies?
New cabinets above my range in Ottawa: what clearance applies?
Ontario's Building Code sets the clearance between the top of your cooktop burners or elements and any framing, finishes or cabinetry installed directly above. The minimum is 750 mm (clause 9.10.22.2.(1)).
That 750 mm drops to 600 mm under one condition: the material above the cooktop is noncombustible, or it is protected by a metal hood that projects at least 125 mm beyond the framing, finishes or cabinets above (9.10.22.2.(2)). So if your range hood projects far enough past the cabinet face, the cabinet itself can sit closer to the burners, down to 600 mm.
The Code also addresses the sides, not just the top. Combustible wall framing, finishes or cabinets within 450 mm of the cooktop must be protected above the burner level by gypsum board at least 9.5 mm thick, or a material with a 10-minute fire-resistance rating and a flame-spread rating of no more than 25 (9.10.22.3.(1)). Cabinets sitting at least 450 mm above the burners are exempt from that side protection, except for any cabinet directly above the cooktop (9.10.22.3.(3)). Countertop splash boards and back plates need no protection (9.10.22.3.(2)).
These are minimums for new work. Ask the City's Building Code Services how they apply to your specific renovation before the cabinets go in.
One more thing to check: the range or cooktop manufacturer's installation instructions. They sometimes call for more clearance than the Code minimum, and your contractor should have those figures before setting cabinet height.
On the permit side, the City's exempt list covers replacing kitchen cabinets where plumbing fixtures stay in place. New upper cabinets above a range are not named on either the City's exempt or permit list; ask the City's Building Code Services whether your job needs a permit before the work starts.
Measure the distance from your cooktop burners to the underside of the planned cabinet, confirm whether your hood projects 125 mm past the cabinet face, and bring both numbers to your contractor so the cabinet height is set before anything is fastened.
Want this done at your place?
Tell us what you want to change in your kitchen and we'll send it to local Ottawa kitchen renovation contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.
Kitchen Reno IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.
Ready to Get Quotes?
Find local kitchen renovation contractors in Ottawa. Free matching, no obligation.